← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Inverter/Aux Battery question
From:Dave Mcneely <mcneely4@COX.NET>
Date:Tue, 2 Aug 2011 07:52:39 -0500

For what it's worth, the "freezer bags" are quite a bit tougher, and have a white band for labeling that takes and holds the ink better.  Screws and what not are less likely to poke through the tougher membrane.  mcneely

---- Kim Brennan <kimbrennan@MAC.COM> wrote:
> Sharpies write on plastic sandwich bags rather nicely. When pulling parts off my vans, I often times will stick the nuts and bolts and what not into plastic sandwich bags, and then right on the bag what the part is from/for. Saves a lot of time later on when putting things back on.
>
> (like where did this nut come from? Oh, starter motor nut.)
>
>
> On Aug 1, 2011, at 12:12 PM, Loren Busch wrote:
>
> > RE: Laptops and such
> > While into the topic of laptop current draw, etc.  let me repeat what has
> > been said many times before on this subject:  12v adapters are just as
> > efficient (and probably more so) as an inverter!  With an inverter you are
> > taking 12v DC, pumping it up to 110v AC, plugging in the laptop adapter that
> > then drops the voltage way back down to (typical) 19v DC to supply the
> > laptop.  And there is going to be a loss (assume 85% efficiency) each step
> > along the way.  The 12v adapter is only doing that once.  If in doubt just
> > put your hand on the laptop AC adapter and feel the heat loss during the
> > conversion. Another advantage is that the 12v adapters are usually more
> > compact and easier to haul around and store than the AC adapters.  Use the
> > inverter only for those items that are 110v AC only.  And a tip to minimize
> > confusion (and possible problems):  Label each power cord/adapter your have
> > with a piece of tape and the description of the device it came with and is
> > intended to be used with!!  Then put those power cords into their own
> > individual Zip Lock bags (along with any other items for that device) and
> > label that bag also.  Now find just one place in the Westy and put ALL power
> > cords and adapters in that one place for storage.  I carry several devices
> > and since I started doing this I've eliminated a lot of confusion, believe
> > me.

--
David McNeely

← Previous in threadNext in thread →
Back to August 2011, week 1
Have something to add on this topic today? Revive this thread in the forum »